However, if the primary adapter gets disconnected from the Internet, there are a few options for the secondary adapter. The primary adapter is the first adapter that the user wants the system to use in order to access the network. Disable – BridgeChecker will always disable this adapter, even if the adapter is connectedĬlick the drop down to choose the appropriate type and category for each adapter from the list.Whitelist – BridgeChecker will not monitor this adapter (Used for VMWare or virtual adapters).Third – Third adapter for the system (Generally either an aircard or a 4G adapter).Secondary – Secondary adapter for the system (Generally a wireless network).Primary – Primary adapter for the system (Generally Ethernet or a direct line).Mobile Data Card – Any mobile data card like 3G or 4G.NOTE: If no primary/secondary/third network cards are connected to the network, then BridgeChecker will not perform any tasks.ĭisplays all currently available adapters of the system. NOTE: After making any changes, please make sure to save changes by pressing the Apply Policy button. Selecting this option will not automatically enable secondary adapter and will require manual user action using Wireless on-off shortcut on the Desktop (or in the BridgeChecker Folder, depending on installation.) If no primary network adapter is connected, use Desktop on/off feature to enable secondary network adapter Selecting this option will automatically enable the wireless adapters if the wired adapter is not connected. If no primary network adapter is connected, enable secondary network adapters Release IP address before disabling adapterĬhecking this option will release the IP address associated with adapter before disabling the adapter, so as to avoid DHCP issues.Īutomatically disable any newly discovered adapterĬhecking this option prevents new adapters from connecting, regardless of other rules.ĭisable all USB adapters except WhitelistedĬhecking this option will disable all USB adapters that are not whitelisted. If no primary or secondary network adapter is connected, enable tertiary network adapterĬhecking this option will enable the third adapter if both primary and secondary adapters are not connected. Turn off all wireless on bootup / shutdownĬhecking this option will disable all wireless adapters on system shutdown and startup. If any primary network adapter is connected, automatically disable all secondary network adaptersĬhecking this option will disable the wireless adapter automatically if a wired adapter is connected.ĭisable all other primary adapters if any first is connectedĬhecking this option will disable all adapters set to "primary" that are not at the top of the System Adapter List, if the primary adapter at the very top of the list is connected. Some of the rules have already been configured during installation. This tab allows configuration of various BridgeChecker rules and adapter settings. Unless the password was previously changed, the default password is: 123 Select the Config Manager option in order to access the settings. Look for the BridgeChecker icon and right click. Go to the bottom right side of the screen and click the arrow. Launching BridgeChecker allows the user to open the Config Manager and change those settings. NOTE: If BridgeChecker is installed, the service is already running in the background with the preset options. To configure and/or change custom settings for operations, launch BridgeChecker.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |